Solid Waste Disposal

For the collection of solid waste materials we can provide open or closed containers to meet the customer requirements. Depending on the density of the waste we can provide containers with a capacity ranging from 1.6 m³ - 40 m³. The collected refuse is transported to the Municipality Landfill for disposal in strict compliance with the rules and regulations of the Kingdom of Saudi Arabia by the following special designed trucks:

Compactor Truck

These trucks with hydraulic lifting system and loading capacity from 15 m³ to 26 m³ are used for collection and disposal of compactable waste from 1.6 or 5.0 m³
(commonly know as 1600 and 5000 liter) roll-containers. The containers are emptied on location and refuse collected in the hopper of the truck. Once the truck is full it will proceed to the dumping area.
The empting of the 1.6 and 5.0 m³ roll-containers are carried out on a scheduled basis as per customer requirements. This service is rendered mainly to: Offices, Hotels, Restaurants, Supermarkets, Camps/Compounds, Warehouses, Stores or any other location where compactable waste is generated.

 

 

Container Truck

For non-compactable trash, such as wood, steel, concrete, etc. open containers ranging from 5 m³ to 12 m³ can be provided. The size of the container provided to
the customer depends on the type of waste and density, or the available area to place the container at the site.
These containers (skips) are collected from the site by the container truck and transported to the dumping area where the container is emptied. The container is returned to the customer as per his request. In most occasions the container is replaced by an empty container upon arrival of the truck, in order to reduce travel time.The 5 m³, 8 m³ and 12 m³ containers (skips) are commonly used at: Construction sits, Workshops, Refinery and Petrochemical Plants, Factories, etc.

 

Hook Truck

For bulk non-compactable trash with a low density, such as wood, paper, plastic, fiberglass,
etc. open containers ranging from 20 m³ to 40 m³ can be provided. The size of the container provided to the customer depends on the type of waste and density, or the available area to place the container at the site.
These containers (skips) are collected from the site by the hook truck and transported to the dumping area where the container is emptied. The container is returned to the customer as per his request. Due to the large quantity of waste transported the number of trips or frequency of emptying can be reduced.

 

 

The 20 m³, 30 m³ & 40 m³ containers are commonly used at: Warehouses, Refinery and Petrochemical Plants, Factories, etc.Special modified containers are available or custom made on costumer requests, such as: Oil Storage Containers, Site Offices, Tool Containers, Septic Tanks, etc.

Contact

  • Al Fahhad Zegwaard Co                                          P.O. Box: 4537, Dammam - 31412.                     Saudi Arabia
  • +9663-811-5944/811-6085
  • +9663 811 6081/811 6082
  • This email address is being protected from spambots. You need JavaScript enabled to view it.

Our Clients

Send Us A Message

  Mail is not sent.   Your email has been sent.
We use cookies to improve our website. By continuing to use this website, you are giving consent to cookies being used. Cookie policy. I accept cookies from this site. Agree